TP-Link TL-WPA8630P KIT Review: Improve your WIFI coverage

I love powerline adapters as they are incredible devices. They are really easy to setup and it works better than wireless repeaters. Previosuly, I use a set of AV500 powerline wireless extender to improve the wireless coverage of my home and they worked really well. It is incredibly simple to setup and the performance is simply amazing. You can read my review of TP-Link TL-WPA4530 KIT here. Well, TP-Link recently released the TL-WPA8630P KIT which is an AV1200 capable powerline wireless extender kit so I decided to take a look and see how good it is.

TP-Link TL-WPA8630P KIT Hardware Overview

TP-Link TL-WPA8630P KIT comes with 2 adapters. You have the main powerline adapter which is the one that will be connected to your main wireless router and the wireless powerline adapter which is the wireless extender access point. Both adapters now support power passthrough in which there is a power outlet on the powerline adapter so you do not waste a power outlet. Besides, the wireless powerline adapter comes with 3 Gigabit Ethernet LAN ports which is handy. For instance, you can have the wireless powerline adapter used near your TV so you can plug in your IPTV STB or your gaming console and have extended wireless coverage at the same time.

 

Speaking of specifications, the TL-WPA8630P KIT support the powerline AV1200 standard. This mean that they are really fast with a theoretical performance of up to 1200Mbps but that is really unlikely in real world. It is still very much faster than a AV500 powerline network nevertheless. The wireless powerline adapter support 2X2 MIMO Wireless AC for optimum wireless performance. All the Ethernet ports are now Gigabit capable now where the Ethernet ports are only rated up to 10/100 on the previous AV500 version of TP-Link powerline adapter.

Setting Up the Powerline Adapter

Setting up a powerline extended network is really simply. You just connect your wireless router to the main powerline adapter and turn it on. Next, plug the wireless powerline adapter to any wall outlet in your house and that’s all. Both powerline adapters will automatically negotiate a network without any configuration required. Your powerline network is now good to go and the wireless powerline adapter should be expanding your wireless coverage now.

 

It is always really easy to configure a powerline network and TP-Link has made it even simpler. The powerline adapters can be configured using the tpPLC app which is available for both Android and iOS devices. I actually recommend using the app over the web interface as you can do everything on the app. You can view the performance of your powerline network or change the name of your wireless network from there. Besides, you can also turn off the LED indicators. This could be useful if you use the powerline adapters in your bedroom and you don’t want the blinking lights to disturb your sleep.

It is worth mentioning that it is possible to have have more than 2 powerline adapters exist together as well. I am currently using 3 powerline adapters in my house so am able to use Wireless AC on my entire home without it dropping out. Practically, if you have a really big property, you can have your wireless router in the middle of the house and consider getting 2 wireless powerline adapter at 2 ends of the house for the best whole home Wireless AC coverage.

TL-WPA8630P AV1200 High Performance

The performance of the TP-Link AV1200 powerline extender KIT is really impressive. Previously, the wireless signal in the furthest room in my house is only 1 bar without the powerline wireless extender and the performance is terrible. With the wireless powerline extender installed, I see a huge boost in performance. I am able to get up to 100Mbit/s which is a huge improvement for me.

This AV1200 is also better than the previous TP-Link AV500 powerline adapter I have previously. With the AV500 powerline, I can achieve around 60Mbps on a speedtest. However, with this new AV1200 capable powerline, my performance doubled and I am getting the full 100Mbps of my Internet through the extended wireless network.

My home is having a three phase power configuration and I figured that the performance can be higher if I my home is using a single phase cabling. However, it is already much better than a wireless repeater. The ping latency is really not really affected so that may be a point for consideration when comparing against a wireless repeater.

Unifi HyppTV Extension

If you use TM Unifi, you can use a powerline network to install your HyppTV box somewhere in your house instead of directy connected the wireless router. The configuration is just very simple as well. You just connect your first powerline adapter to the IPTV port on your wireless router and connect your HyppTV box on the extended powerline adapter.

The Verdict

 

I always recommend my readers to use a powerline wireless extender to improve their wireless coverage instead of wireless repeater whenever possible as a powerline wireless extender is able to perform so much better and it offers far better stability than a wireless repeater system. TP-Link TL-WPA8630P KIT is a good set of powerline adapters. They are able to extend my wireless coverage reliably and offer a really good performance.

In short, they are really well built and they work really well. I can’t find any issues with them and I have been using it for a month prior to this review. Setting up the powerline network is as simple as plug and play as well. At around RM450, it is not exactly cheap but the performance it offers is amazing and this is a recommended purchase if you really want the high AV1200 performance. If you want some cheaper powerline wireless extender, you can take a look at my previous review of TP-Link AV500 WPA-4530 KIT.

26 Comments
Inline Feedbacks
View all comments

Hi Alvyn

I’ve read in some blogs that the new HomePlug AV2 is able to transmit over different circuits compared to the older powerline adapters.

My house is on single phase wiring, but I have extended a 2nd dB box upstairs from the dB box downstairs. Will this work if my router is connected to the dB box downstairs and the extender is placed upstairs? Most say no, and that it must be connected to the same dB box.

And is it possible to add on a TL-WPA8630P to the TL-PA8010P Kit?

26
0
Would love your thoughts, please comment.x
Scroll to Top